1. check if the correct passes and fan rotates wheh theh
switch is on .
2.try to switch off and check if it has stopped .
3.check the freeness of the wings
4, check if does any sound while rotating or stopping
5. check the regulator if it user friendly to Adjust the
SPEED.
6.Change the speed and see if the rotaition also has teh
same change .
7.check the color and wings are straight and are well attahed to the base .
Thursday, December 3, 2009
32. test case for Lift?
1. Check for the appropriate no of buttons?
2. What happen if I touch the open button twice?
3. What happen when I press open button while lift is
moving and it is in the middle of the two floors?
4. What happen when I press the open button for some time?
5. Check for the sound when lift is opening.
6. Check for the direction by pressing up and down button.
7. Enter in the lift specify the floor say 4 and check for
the corresponding floor?
8. Lift is moving and the power break off. Does the alarm
blow in the control room that there is power break off?
9. Also check for the case how the inside person inform the
lift man that he got stuck in the lift (if there is phone
button does it works)?
10. Also check for the response time to start lift again?
11. When a person is in the lift any light is there or not?
12. How many persons at a time will carry the lift in the
since in moving time.
13. With out load if we press the up button is it moving or
not.
14. What happen with out specifying the floor number if we
press the up or down?
15. What happen if the lift is in over load mode (over load
sound will come before moving or it moves).
16. With out load if we press the up button and specify the
floor number what is happening?
17. Is the door get closed itself or have to close manually.
18. If the door closed automatically check for the closing
time?
19. If the door closed automatically also check for the
sensor? Suppose the closing time is 2 min and it passed and
people are still getting in. What happen does the door get
closed or wait for the people to get in?
20. What happen when you press the same floor number on
which lift is already there?
21. After getting into the lift one person is there he
wants to go up but we want to go down already he specified
the floor number before we enter in to the lift. After that
we specified our floor number then what will be the
priority of the lift?
22. Lift is empty and is moving downwards I entered and
want to go up. Is there the button to change the direction
of lift and the button working?
23. Is the floor number displayed up in side the lift
correct?
24. When happen when the out side person want to open the
door but
Inside person wants to close the door at the same time.
2. What happen if I touch the open button twice?
3. What happen when I press open button while lift is
moving and it is in the middle of the two floors?
4. What happen when I press the open button for some time?
5. Check for the sound when lift is opening.
6. Check for the direction by pressing up and down button.
7. Enter in the lift specify the floor say 4 and check for
the corresponding floor?
8. Lift is moving and the power break off. Does the alarm
blow in the control room that there is power break off?
9. Also check for the case how the inside person inform the
lift man that he got stuck in the lift (if there is phone
button does it works)?
10. Also check for the response time to start lift again?
11. When a person is in the lift any light is there or not?
12. How many persons at a time will carry the lift in the
since in moving time.
13. With out load if we press the up button is it moving or
not.
14. What happen with out specifying the floor number if we
press the up or down?
15. What happen if the lift is in over load mode (over load
sound will come before moving or it moves).
16. With out load if we press the up button and specify the
floor number what is happening?
17. Is the door get closed itself or have to close manually.
18. If the door closed automatically check for the closing
time?
19. If the door closed automatically also check for the
sensor? Suppose the closing time is 2 min and it passed and
people are still getting in. What happen does the door get
closed or wait for the people to get in?
20. What happen when you press the same floor number on
which lift is already there?
21. After getting into the lift one person is there he
wants to go up but we want to go down already he specified
the floor number before we enter in to the lift. After that
we specified our floor number then what will be the
priority of the lift?
22. Lift is empty and is moving downwards I entered and
want to go up. Is there the button to change the direction
of lift and the button working?
23. Is the floor number displayed up in side the lift
correct?
24. When happen when the out side person want to open the
door but
Inside person wants to close the door at the same time.
31. system testcase and functional testcase for the below scenario scenario: view the balance in online account
These should be test cases
1.User should be login into the account with valid user id
and password.
2. After login into the system there should be an option for
checking the balance.
3.After choosing that option balance status should be
visible to the user.
4.After viewing the balance there should be an option for
logout from the account.
5.Choosing the option for Logout user should be successfully
logout from the system.
1.User should be login into the account with valid user id
and password.
2. After login into the system there should be an option for
checking the balance.
3.After choosing that option balance status should be
visible to the user.
4.After viewing the balance there should be an option for
logout from the account.
5.Choosing the option for Logout user should be successfully
logout from the system.
30. test cases for how do u send a message in mobile
1.Verify whether phone is in On state.
2.Verify whether the network is available.
3.Verify whether the mobile supports message sending.
4.if the above all are suitable for proceedings then go for
menu option.
5.select Messages option in the menu.
6.select write message option from the list.
7.enter the text not exceeding the limit.
8.it should not accept the text exceeding the limit.
9.after entering the text enter ok button
10.select options for sending whether group/single/contacts.
11.if contacts option is being selected then select the
required no. and then click ok.corresponding message to
that no.shall be transfered.
12.if u directly go for number option then type the number
and then click ok.
13.message to the corresponding no. is being transfered.
14.mobile displays sent message text .
15.mobile also displays delivered message text confirming
that message has been delivered to corresponding no.
16.successfully message can be send in mobile.
2.Verify whether the network is available.
3.Verify whether the mobile supports message sending.
4.if the above all are suitable for proceedings then go for
menu option.
5.select Messages option in the menu.
6.select write message option from the list.
7.enter the text not exceeding the limit.
8.it should not accept the text exceeding the limit.
9.after entering the text enter ok button
10.select options for sending whether group/single/contacts.
11.if contacts option is being selected then select the
required no. and then click ok.corresponding message to
that no.shall be transfered.
12.if u directly go for number option then type the number
and then click ok.
13.message to the corresponding no. is being transfered.
14.mobile displays sent message text .
15.mobile also displays delivered message text confirming
that message has been delivered to corresponding no.
16.successfully message can be send in mobile.
29. test cases for the below field browse upload
There is one more case which is an imp one.
1> instead of using browse button, check whether the
textbox is editable and user can directly the write the
entire path of the file and the on click of upload button
the file should get uploaded.
2> negative case for the above scenario is, write a wrong
path or a path where no such file exits and click
upload.here the system should give a message saying wrong
path or no such file found.
3> also check if the upload functionality is only for
authorised user, if mentioned in the specification.
4> on succesful upload, display a message the file upload
successfuly.
5>when upload is in process the upload and browse button
should be disabled, just to avoid clicking of those buttons
when activity is in process.
6>Check if error handling is done , if the upload takes
time then there should not be any error saying timeout.
7> also check in what time the file should be uploaded for
the max size.
8>if upload is done to store a file on some server folder
i.e server location, check same file with same filename
should not be uploaded in the same location, or if its a
databse then duplicate records should not be uploaded in
the same tables.
1> instead of using browse button, check whether the
textbox is editable and user can directly the write the
entire path of the file and the on click of upload button
the file should get uploaded.
2> negative case for the above scenario is, write a wrong
path or a path where no such file exits and click
upload.here the system should give a message saying wrong
path or no such file found.
3> also check if the upload functionality is only for
authorised user, if mentioned in the specification.
4> on succesful upload, display a message the file upload
successfuly.
5>when upload is in process the upload and browse button
should be disabled, just to avoid clicking of those buttons
when activity is in process.
6>Check if error handling is done , if the upload takes
time then there should not be any error saying timeout.
7> also check in what time the file should be uploaded for
the max size.
8>if upload is done to store a file on some server folder
i.e server location, check same file with same filename
should not be uploaded in the same location, or if its a
databse then duplicate records should not be uploaded in
the same tables.
28. test cases for traffic signals in a four raod junction.
Check for the availability of POLE with Lights in FOUR
Directions.
Check for the POWER connection of the lights.
Check whether the Availability of GREEN,RED,yellow lights.
Check whether the Lights are glowing as per the Traffic
rules i.e starts with red light,Yellow light before the green signal come out,Green light at the last.
Directions.
Check for the POWER connection of the lights.
Check whether the Availability of GREEN,RED,yellow lights.
Check whether the Lights are glowing as per the Traffic
rules i.e starts with red light,Yellow light before the green signal come out,Green light at the last.
27. test cases for any credit card
-test the size of the card
-test the color of the card
-test the thickness
-bank name should be there
-material used for card should not be harmful
-card should not break if thrown from a certain height
-card should not be very flexible
-magnetic strip should be at proper place
-magnetic strip have no effect in different environmental
conditions
-card contains the name of the holder
-card contains the expiry date
-card contains account number-if we swipe the card, machine is accepting it
-test the color of the card
-test the thickness
-bank name should be there
-material used for card should not be harmful
-card should not break if thrown from a certain height
-card should not be very flexible
-magnetic strip should be at proper place
-magnetic strip have no effect in different environmental
conditions
-card contains the name of the holder
-card contains the expiry date
-card contains account number-if we swipe the card, machine is accepting it
Subscribe to:
Posts (Atom)
